Skip to content
Types of Heaters
TurboFlex Heaters are offered in three material types based upon the application.
Types of Heaters
TurboFlex Heaters are offered in three material types based upon the application.
HIGH TEMP POLYESTER (PET)
PN 5725013
- UL Recognition: E-10549 (specified on a per-order basis)
- Bond Ply Layers: FR Halogen-Free Modified Polyester Thermal Cured Adhesive
- Dielectric Layers: PET Polyethylene Terephthalate Insulation Film (in varying thickness from 25 micron to 75 micron)
- Typical Dielectric Strength: 7000 Volts per mil
- Foil Type Options: CUN and Cu in varying thickness, metallurgy, and resistivity
- Thermal Rating of Lamination Stack (converted into patterned heaters): Rated at 125C
POLYIMIDE (PI)
PN 5725014
- Dielectric Layer Certification: IPC-4203/1
- Bond Ply Layers: Acrylic Thermoset Epoxy
- Dielectric Layers: PI Polyimide Film (in varying thickness from 25 micron to 75 micron)
- Typical Dielectric Strength: 7700 Volts per mil
- Foil Type Options: CUN and Cu in varying thickness, metallurgy, and resistivity
- Thermal Rating of Lamination Stack (converted into patterned heaters): Rated at 150C and higher depending upon end-customer installation practice
TEFLON (PTFE) WOVEN FIBERGLASS
PN 5725015
- High Temperature Applications
- Dielectric Layer Certification: IPC-4203/1
- Bond Ply and Mounting Layers: Silicone Adhesive
- Dielectric Layers: PTFE PolyTetraFluoroEthylene with Woven Fiberglass Structure
- Typical Dielectric Strength: 7700 Volts per mil
- Foil Type Options: CUN and Cu in varying thickness, metallurgy, and resistivity
- Thermal Rating of Lamination Stack (converted into patterned heaters): Rated at 225C and higher depending upon end-customer installation practice
- Compliant with REACH, ROHS, and WEEE Directives
