Order Request Form - TurboFlex Customized Heaters

TurboFlex Order Request Form

Thank you for your interest in TurboFlex Customized Heaters. Please complete the form below with your desired heater information and we will promptly reply with a quotation. If your requirements do not fit our design criteria, please submit an Advanced Heater Request.

TurboFlex Order Request Form

CONTACT INFO

First & Last Name

Email(Required)

Phone(Required)

Company Name(Required)

HEATER DETAILS

Heater Type(Required)

Heater Quantity(Required)

Is the watt density 10 or less?(Required)

To calculate Watt Density, divide the wattage by the overall area of the heater in inches. To reduce WD value, either lower desired wattage, or increase the size of the heater.

Enter desired watt density (watts per sq. inch)

Enter desired voltage:(Required)

Enter desired wattage:(Required)

How are you planning to attach the heater to its mounting surface in order to transfer the heat?

PSA= Pressure Sensitive Adhesive (3M 467 MP "sticky back" adhesive pre-mounted on heater)

Does the resistance density fall in the green zone of this chart?(Required)

To calculate Resistance Density, determine the resistance of the heater (voltage squared divided by wattage). Then divide the resistance figure by the area of the heater in inches. If the result exceeds the green area of the chart, either 1. Lower voltage, 2. Increase wattage, or 3. Increase size of heater.

WIRE & ATTACHMENT DETAILS

-Connection Wire Insulation Type = White, PTFE/Teflon
-Insulation Over Joints
-Potting = .125" Max Height, Black

Wire Gauge (Stranded)(Required)

Length of wire from edge of heater:(Required)

Heater surface that wires are attached to:(Required)

Position of Wires(Required)

If other, please describe.

Is the heater size smaller than 23 X 17 for polyimide or 47 X 23 for polyester?(Required)

Please provide desired size information:(Required)

Are there any internal cutouts or holes?(Required)

If yes, please describe.

Is a tolerance of +/- 10% for the heater acceptable?(Required)

FILE UPLOAD

Upload a sketch or print (if available).

Max. file size: 100 MB.